?1) The halogen lamps inside the dryer do not work. What should be done?

- First off, the lamps inside the machine room are shut off when they are overheated because the bimetal falls off. Press the red bimetal. It should be barely hanging when pressed.

- If the lamps do not turn on with the bimetal hanging barely, the lamps must be replaced.

2) Inner temperature of the dryer is too high. Why does this happen?

- The temperature controller (sensor) inside the PCB is broken and needs to be replaced.

3) What should be done if power cannot be turned on?

- First off, switch on the breaker and check whether electricity flows into the dryer.

- Press the tiny button underneath the breaker within the dryer and see if the dryer works. It is does, electricity is flowing. If not, check main electricity.

- If main electricity flows but power cannot be supplied to the dryer, the breaker inside the dryer needs to be replaced.

 4) What if the tray turning table does not rotate?

- As the bolts connecting the turning table axis and turning table can be loose, tighten the bolts. (The bolts can get loose if the turning table is forcibly rotated to the left.)